← Back to Portfolio

Plan Sheet Generator · 5 ft × 10 ft · Six legs · Rolls

Mobile Work Table

Pick how you'll use it and the height you want. You get the cut list, the boards to buy, to-scale drawings and every step to build a 2x4-and-5×5-plywood table that is dead flat, heavy enough to trust, and still rolls out of the way.

01 · Set it up

What's it for?

Options

Floor to the top of the mounting plate, from the caster's spec sheet. Typical: 3" wheel 4", 4" wheel 5-1/8", 5" wheel 6-1/4", leveling caster 4".

02 · Your table

03 · Drawings to scale

Plan view — top panels over the framing

  • layer 1 seams
  • layer 2 seams
  • skin seams
  • joists & frame

Side elevation — long side

End elevation — short side

04 · Cut list

Lumber
PartQtyStockT × W × LNotes
Sheet goods
PartQtyStockT × W × LNotes

05 · Materials & tools

Materials

    Tools

    • Track saw, or circular saw with a straightedge (sheet cuts)
    • Miter saw (cross members, legs)
    • Drill and impact driver, countersink bit, socket for the lags
    • Framing square, 4 ft level or straightedge, tape, chalk line
    • Clamps — at least four long ones
    • Random-orbit sander; router with flush-trim and roundover bits
    • Eye, ear and dust protection, and a helper for the sheets and the flip

    06 · Build steps

      07 · Casters & moving it